The four layers that make up a PCB, how copper clad laminate (CCL) is classified by reinforcement, flammability and performance, and what the silkscreen does.

A PCB generally consists of four layers that are laminated together with heat into a single board. From top to bottom, the materials are the silkscreen, the solder mask, the copper and the substrate.

Classification of copper clad laminate (CCL)
The widely used copper clad laminate (CCL) can be classified in different ways: by reinforcing material, by the resin adhesive used, by flammability and by CCL performance. The table below gives a brief classification of CCL.
| Classification standard | Type | Materials |
|---|---|---|
| Reinforcing material | Paper base | PF resin (XPC, FR-1, FR-2), epoxy resin (FR-3), polyester resin |
| Reinforcing material | Glass fiber cloth base | Epoxy resin (FR-4, FR-5) |
| Reinforcing material | Composite epoxy material (CEM) | — |
| Reinforcing material | Multilayer laminate base | — |
| Reinforcing material | Special material base | BT, PI, PPO, MS |
| Flammability | Flame-retardant | UL 94 V-0, UL 94 V-1 |
| Flammability | Non-flame-retardant | UL 94 HB |
| CCL performance | Ordinary performance CCL | — |
| CCL performance | Low dielectric constant CCL | — |
| CCL performance | High heat resistance CCL | — |
| CCL performance | Low coefficient of thermal expansion CCL | — |
The silkscreen layer
Above the green solder mask is the silkscreen layer, which adds the letters, numbers and symbols that make a PCB readable. This makes it easier for electronics assemblers to place each component in the right position and orientation. The silkscreen is usually white, although colors such as red, yellow, gray and black are also sometimes used.
- #PCB materials
- #copper clad laminate
- #FR-4



